A homeowner opens the door to three strangers who are about to carry everything they own out of the house. In the first ten seconds, they decide whether to relax or hover over your crew for the next four hours. Matching shirts with a company name and a phone number do more for that moment than anything you could tell your guys to say.
Here is what actually matters when you order uniforms for a moving or junk removal crew: fabric that survives strap friction, print that outlasts the truck lettering, and a back-of-shirt layout that turns your crew into the cheapest advertising you will ever run.
Trust starts at the front door
Your estimate won the booking; the uniform confirms the decision. Customers are handing strangers their furniture and boxes of things they could never replace. A crew in matching shirts reads as a real company with insurance and someone accountable at the top. A crew in random gym tees reads as three guys with a truck, and the customer hovers all day.
There is a second audience most owners forget: the neighbors. A residential move is a spectator event, and your crew walks the same path from door to truck for hours. Every trip, your company name and phone number cross the lawn again. Junk removal is even better, because the truck often sits in the driveway of the nicest street you serve.
Uniforms also change how a crew works: people behave differently wearing the company name, and customers mention a sharp crew in reviews. Our moving crew collection was built for exactly this trade.
Fabric that survives straps, sweat, and driveway sun
A cotton tee is soaked by the second flight of stairs. Wet cotton gets heavy, clings, chafes under a shoulder strap, and looks rough by the time your crew rings the next doorbell — and that customer judges them the same way the first one did.
Our uniforms are lightweight moisture-wicking polyester. Sweat moves to the surface and dries instead of pooling, so the shirt your crew wears at the 4 p.m. job looks close to the one they put on at 7 a.m. The fabric is rated UPF 50+, which counts for something when a load-out means three hours in an unshaded driveway in July.
For junk removal and cleanout crews there is one more point: the fabric is chemical and bleach resistant. Splashes from cleaning agents, truck wash-downs, and whatever leaks out of a garage cleanout will not leave the pink blotches that kill a cotton shirt in one job. Wash it, and it is ready the next morning.
Why the print method matters more than you think
Think about where your logo sits and what happens to that spot all day: furniture straps across the shoulders and chest, boxes hugged against the torso, dolly handles, seatbelts, then a hot dryer at night. The three common decoration methods handle that torture test very differently.
Screen printing lays a film of ink on top of the fabric. Friction and heat crack it, and every wash cycle peels a little more until the phone number on the back is half gone. Embroidery survives friction, but a stitched patch is stiff, catches on straps, and the backing gets scratchy against sweaty skin. It also prices by stitch count, so a phone number big enough to read from across the street is rarely practical on the back.
Dye sublimation works differently: the design is dyed into the polyester fibers themselves. There is no layer sitting on top of the fabric, so there is nothing to crack, peel, or fade, no matter how many strap loads or wash cycles the shirt takes. And because the whole garment is printable, a full-width phone number across the back costs nothing extra.
| Factor | Dye sublimation | Screen print | Embroidery |
|---|---|---|---|
| How it is applied | Dye bonded into the fibers | Ink layer on top of fabric | Stitched thread patch |
| Under strap friction | Unaffected, nothing to rub off | Cracks and peels over time | Holds up, but catches on straps |
| Feel on skin | Same as the fabric, no added weight | Stiff plastic-like patch | Thick, scratchy backing |
| Print area | Entire garment, front and back | Limited zones, each adds cost | Small areas only |
| After 50 washes | No cracking, peeling, or fading | Visible cracking and fade | Thread intact, fabric may pucker |
Front, back, and sleeves: a layout that wins callbacks
The front is for the customer at the door: logo and company name on the chest, clean and readable at handshake distance. The back is the money side. While your crew carries a sofa down the walkway, their backs face the street, the neighbors, and every car driving past.
- Back, top: company name, large.
- Back, middle: phone number, the biggest element on the shirt. If a neighbor cannot read it from across the street, it is too small.
- Back, bottom: a short services line, such as "Moving - Packing - Junk Removal".
- Sleeve: website or a "Licensed & Insured" note if you carry it.
Keep contrast high, use one phone number, and skip the slogan. Nobody dials a shirt because of a tagline; they dial because the number was readable while they watched your crew work for two hours.
You do not need design software. Send your logo, company name, phone number, and services, and our designers build the layout free. You get a digital mockup within 24 hours, revisions are unlimited, and nothing goes to production until you approve. Already have print-ready artwork? Use the your-design uniform and we print it exactly as sent.
Sizing for people who lift all day
Our garments are a US athletic fit and run fitted. That looks sharp on an estimator, but a mover reaching overhead to stack a truck wants room across the shoulders and back. The practical rule: anyone between sizes, or anyone who lifts for a living and prefers a looser cut, should go one size up. The range runs S through 5XL, so one order covers the whole roster.
Collect sizes instead of guessing: send your crew the size chart and ask each person for a letter. There is no minimum order, so a spare shirt or a single replacement for a new hire ships the same way a crew order does.
One design, every season, easy care
A moving crew works every month of the year, so the uniform has to as well. The same design prints across the full lineup: t-shirts and tank tops for summer, long sleeves for sun cover, polos for estimators, and sweatshirts, hoodies, and zip hoodies for 6 a.m. load-outs and winter storage runs. Layer a zip hoodie over the company tee and the crew still matches when it comes off at noon. There are matching 20 oz and 40 oz insulated tumblers for the cab, too. Browse the full catalog to see every garment in one place.
Care is simple: machine wash, no special handling, and a bleach splash on laundry day will not ruin the shirt. Because sublimation never fades, the hoodies you add in November still match the tees you bought in July.
How ordering works
- Pick your garments and colors from the moving collection or the catalog.
- Send your logo, company name, phone number, and services list at checkout. No artwork skills needed; the design work is free.
- Receive a digital mockup within 24 hours. Request changes until it is right; revisions are unlimited and production only starts after your approval.
- Production takes 3 to 5 business days, and delivery typically takes 7 to 15 days.
Crew discounts apply automatically in the cart: 5 percent off at 5 or more items, 10 percent at 10 or more, and 15 percent at 15 or more. Orders of 5 or more items ship free to any country; smaller orders ship at a flat $5.99 to the US, Canada, UK, Australia, and New Zealand, or $9.99 across the EU. The full walkthrough is on the how-to-order page.
Frequently asked questions
Is there a minimum order?
No. You can order a single shirt to check the fabric, fit, and print before outfitting the whole crew. Discounts start automatically at 5 items, and free worldwide shipping kicks in at the same threshold.
How fast can my crew be in uniform?
The free mockup arrives within 24 hours of sending your details. After you approve it, production takes 3 to 5 business days and delivery runs 7 to 15 days. From first message to shirts on backs, plan for two to three weeks.
Will the print survive bleach and cleaning chemicals?
Yes. The fabric is chemical and bleach resistant, which matters for junk removal and cleanout work where splashes happen. The print itself is dyed into the fibers, so there is no surface layer to damage, crack, or peel.
What if something arrives wrong?
Every item is made to order, so returns are for defects rather than change of mind. If a garment arrives with a defect, report it within 14 days and it will be remade or refunded.
Ready to look like the company that gets the referral? Head to the moving crew collection, pick your garments, and send us your logo and phone number. You will have a free mockup within 24 hours, and your crew shows up to the next job looking like the reason the neighbors save the number on their backs.
